How to flash Nokia 6300?
Everyone now has a mobile phone, after allour existence without it can not be imagined. But there are times when you bought a phone, it works, but over time or immediately, you see in it various flaws in terms of software. Quite often this happens with the Nokia 6300 phone, but it can be fixed with the firmware of this phone.
So, you have Nokia 6300, how to flash it youdo not know. Then we will help you. First of all, understand for yourself that the firmware of any phone is an update of its software part, like updating the drivers to your video card, just for the phone. Now we will tell you more about how to flash a Nokia 6300 phone.
Firmware for Nokia 6300
To flash this phone you will need:
- The cord that was bundled with your telephone set;
- A special program (most often using Phoenix Service Software).
- And as a matter of fact, you need the firmware itself orinstaller. Remember that you can not flash your phone to the lowest version of the firmware, only to a new one. To check the firmware of your phone, enter the combination * # 0000 #.
After these preparations, we proceed to installationall the accompanying programs for Nokia 6300 firmware. Install the utility of Diego running with Phoenix Service Software. In all the windows that open, click Continue. Next, install the necessary "crack" (crack phoenix service) and everything, the installation of additional software is completed. Then start the firmware phone. From now on, you will learn how to flash Nokia 6300. Launch Phoenix Service Software, in the menu, find "add" and add a new user. So, as you use a USB connection, in the settings, select it. Connect the cable to the phone (remember that the phone must be charged and the computer must detect it).
In Phoenix Service Software, enableoption "Scan Product". After that, your phone will be scanned for firmware, then after the selection of the new firmware in the list appears, click on "start" and wait about 10 minutes. During the installation of the new firmware, your phone will turn on and off several times, go into test mode, but eventually it will turn on and you will have an updated firmware on your Nokia 6300.